Toyota Camry

1992-1997 of release

Repair and car operation

Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
- 10. Automatic transmission
   10.2. General information
   + 10.3. Diagnostics
   - 10.4. Adjustment and replacement of a cable of a choice of transfers
      10.4.2. Replacement
   10.5. Check and adjustment of a cable of management by a butterfly valve
   + 10.6. Check, replacement and adjustment of the switch of blocking of a starter
   + 10.7. Lock of blocking of the lever of a choice of transfers
   + 10.8. Replacement of sealing rings
   + 10.9. Check and replacement of support of a transmission
   10.10. Electronic control system
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment

10.4.2. Replacement

PERFORMANCE ORDER


1. Remove a cable of a choice of transfers from the lever on a transmission.	2. Remove a C-shaped bracket and disconnect a cable cover from an arm.
	3. Unscrew bolts of fastening of a clamp of a cover of a cable of a choice of transfers.
4. Remove the central console.

5. Remove With-shaped fixings of a cover of a cable of a choice of transfers at the basis of the lever of a choice of transfers.	6. Remove a bracket, take a pin and disconnect a cable of a choice of transfers from the lever of a choice of transfers.
7. Take a cable of a choice of transfers from under the car.
8. Installation is made in sequence, return to removal.