Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
- 10. Automatic transmission
   10.2. General information
   + 10.3. Diagnostics
   + 10.4. Adjustment and replacement of a cable of a choice of transfers
   10.5. Check and adjustment of a cable of management by a butterfly valve
   + 10.6. Check, replacement and adjustment of the switch of blocking of a starter
   - 10.7. Lock of blocking of the lever of a choice of transfers
      - 10.7.1. Check
         10.7.1.2. Lock solenoid
         10.7.1.3. Solenoid of blocking by a key
         10.7.1.4. Control switch
      10.7.2. Replacement
   + 10.8. Replacement of sealing rings
   + 10.9. Check and replacement of support of a transmission
   10.10. Electronic control system
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment
вакансии - Москва



10.7.1. Check

10.7.1.1. Control unit lock

GENERAL INFORMATION

Electric circuit of the lock of blocking of the lever of gear shifting

Tension check on contacts of sockets of the control unit by the lock of blocking of the lever of gear shifting

PERFORMANCE ORDER
1. Remove the central console.
2. Connect the digital voltmeter to contacts of each of three sockets of the control unit and measure tension in various positions of the ignition key, a pedal of a brake and the gear shifting lever (see fig. Tension check on contacts of sockets of the control unit by the lock of blocking of the lever of gear shifting).
3. If tension differs from demanded, replace the control unit.