Toyota Camry

1992-1997 of release

Repair and car operation

Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
- 11. Coupling and power shafts
   11.2. General information
   + 11.3. Check and replacement of a disk of coupling
   + 11.4. Vyzhimna bearing
   + 11.5. Main cylinder of coupling
   - 11.6. Working cylinder of coupling
      11.6.2. Installation
   11.7. Air removal from hydraulic system of coupling
   11.8. Starting switch of coupling
   + 11.9. Hinge of equal angular speeds (CV JOINT)
   + 11.10. Replacement of protective covers and repair of hinges of equal angular speeds
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment

11.6. Working cylinder of coupling

11.6.1. Removal

GENERAL INFORMATION

Details of the working cylinder of coupling

1–cover;
2–pusher;
3–piston;
4–spring;
5–case of the working cylinder;

6–sealing laying;
7–special bolt;
8–union;
9–pipeline

PERFORMANCE ORDER

1. Remove a weight wire from the accumulator.

Preventions

At existence in a code radio receiver against theft, before a detachment of the accumulator check that you have connection codes.

On models since 1993 the system of an airbag of safety is disconnected, if the accumulator is disconnected for long term. If a control lamp of a safety cushion it lights up and necessary to burn after repeated connection of the accumulator, it is necessary to address in a specialized workshop for restoration of operability of system.

2. Lift a forward part of the car and fix on supports.

3. Unscrew the pipeline from the working cylinder of coupling, unscrew bolts of fastening and remove the working cylinder of coupling.