Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
- 13. Suspension bracket
   13.2. General information
   + 13.3. Forward stabilizer of cross-section stability
   + 13.4. The lobby is resistant
   13.5. Repair of a forward rack
   + 13.6. Bottom lever of a forward suspension bracket
   13.7. Replacement of the bottom hinge of a forward suspension bracket
   + 13.8. Rotary fist
   13.9. Back stabilizer of cross-section stability
   + 13.10. Rack of a back suspension bracket
   13.11. Longitudinal draft of a back suspension bracket
   - 13.12. Levers of a back suspension bracket
      13.12.2. Installation
   + 13.13. Nave of a back suspension bracket
   + 13.14. Fixing element of a back nave
   + 13.15. Steering wheel
   + 13.16. Tips of steering draft
   13.17. Replacement of protective covers of steering transfer
   + 13.18. Steering transfer
   + 13.19. Pump of the amplifier of a steering
   13.20. Air removal from steering system with the amplifier
   + 13.21. Wheels and tires
   13.22. Corners of installation of wheels
+ 14. Body
+ 15. Electric equipment
вакансии - Москва




13.12. Levers of a back suspension bracket

13.12.1. Removal

PERFORMANCE ORDER
1. Lift a back part of the car and fix on supports.
2. Unscrew a bolt of fastening of longitudinal bent for to a fixing element of a nave.
3. On models with a body "versatile person" unscrew a nut of fastening of a spring of the valve of restriction of pressure (LSPV).
4. Unscrew a nut and a bolt of fastening of cross-section levers to a fixing element of a back nave.
5. Unscrew nuts of fastening of cross-section levers of a back suspension bracket to a body.
6. Remove the back cross-section lever.
7. Unscrew the left and right clips of fastening of the stabilizer of cross-section stability.
8. Remove the central exhaust pipe.
9. Remove the forward cross-section lever of a back suspension bracket.