Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
- 14. Body
   14.1.1. Security measures at carrying out welding works
   + 14.2. Care of a body
   + 14.3. Care of an upholstery and rugs
   + 14.4. Repair of insignificant damages of a body
   14.5. Repair of strong damages of a body
   + 14.6. Cowl
   14.7. Trunk lid
   14.8. Back door
   + 14.9. Replacement of racks of support
   14.10. Door upholstery
   + 14.11. Doors
   + 14.12. Lock, cylinder of the lock and handle of opening of a door
   14.13. Door glass
   14.14. Window regulator
   14.15. Front bumper
   14.16. Rear bumper
   14.17. External rear-view mirrors
   + 14.18. Seats
   14.19. Decorative overlay of a combination of devices
   14.20. Casings of a steering column
   14.21. Central console
   14.22. Ware box
   14.23. Check of a condition of seat belts
   14.24. Front grille
   14.25. Engine mudguard
+ 15. Electric equipment



14.19. Decorative overlay of a combination of devices

GENERAL INFORMATION

Arrangement of brackets of fastening and right screws of fastening of a decorative overlay of a combination of devices
 

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Unscrew screws of fastening of a decorative overlay of a combination of devices (see fig. Arrangement of brackets of fastening and right screws of fastening of a decorative overlay of a combination of devices).
3. For access to the right screws of fastening of an overlay of a combination of devices remove a decorative slip from the central part of the dashboard.
4. Remove the handle of a regulator of illumination and unscrew a lock nut of fastening of a regulator of illumination.
5. Having pulled a decorative overlay of a combination of devices, release it from brackets of fastening and from a reverse side disconnect from it electric sockets.
6. Installation of a decorative overlay of a combination of devices is made in sequence, return to removal.