| 1. Remove a weight wire from the accumulator. |
|
2. Unscrew screws of fastening of a casing of a steering column. |
| 3. Separate halves of casings and remove them from a steering column. |
|
|
4. Using an edge of a thin screw-driver, remove the caps closing screws of fastening of the bottom casing of a steering column (see fig. Arrangement of screws of fastening of the bottom casing of a steering column). |
|
5. Unscrew screws of fastening of the bottom casing of a steering column lower a casing and disconnect from it electric sockets. |
|
6. Installation is made in sequence, return to removal. |