Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
- 14. Body
   14.1.1. Security measures at carrying out welding works
   + 14.2. Care of a body
   + 14.3. Care of an upholstery and rugs
   - 14.4. Repair of insignificant damages of a body
      14.4.2. Repair of dents in a body design
      14.4.3. Repair of the rusted openings or holes in a body design
      14.4.4. Shpatlevka and body painting
   14.5. Repair of strong damages of a body
   + 14.6. Cowl
   14.7. Trunk lid
   14.8. Back door
   + 14.9. Replacement of racks of support
   14.10. Door upholstery
   + 14.11. Doors
   + 14.12. Lock, cylinder of the lock and handle of opening of a door
   14.13. Door glass
   14.14. Window regulator
   14.15. Front bumper
   14.16. Rear bumper
   14.17. External rear-view mirrors
   + 14.18. Seats
   14.19. Decorative overlay of a combination of devices
   14.20. Casings of a steering column
   14.21. Central console
   14.22. Ware box
   14.23. Check of a condition of seat belts
   14.24. Front grille
   14.25. Engine mudguard
+ 15. Electric equipment



14.4.3. Repair of the rusted openings or holes in a body design

GENERAL INFORMATION

Remove paint from the damaged area and approximately on 20 mm round it. Using a metal brush, clear a being showered rust from a surface of the bared metal on the damaged area. Process the damaged area the rust converter according to its instruction. Close an opening from a rust or a hole a metal grid or a strip of an aluminum foil. Cut out approximately corresponding to an opening form a piece of a grid, enclose it in an opening so that its edges did not act over level of the panel surrounding an opening. Fix it by means of several lumps of shpaklevochny paste on perimeter. Using the screw-driver handle, level the grid ends so that it densely adjoined to body metal. Further make a shpatlevka, painting and polishing of the damaged site of a body.