Toyota Camry
1992-1997 of release
Repair and car operation
Kamri's Toyota
+
General data
+
1. Maintenance
+
2. Engine
+
3. Six-cylinder V6 engines
+
4. Major maintenance of engines
+
5. Cooling and heating
+
6. Fuel system
+
7. Ignition system
+
8. Toxicity fall
+
9. Transmission
+
10. Automatic transmission
+
11. Coupling and power shafts
+
12. Brake system
+
13. Suspension bracket
+
14. Body
-
15. Electric equipment
15.2. General information
15.3. Electric chains
+
15.4. Detection of not closed chain
15.5. Safety locks
15.6. Relay
+
15.7. Multipurpose switches of a steering column
+
15.8. Ignition lock
15.9. Switch of a heater of back glass
15.10. Check of a heater of back glass
15.11. Radio receiver
15.12. Loudspeakers
15.13. Aerial
15.14. Replacement of bulbs of headlights
15.15. Adjustment of light of headlights
15.16. Headlight
-
15.17. Replacement of bulbs of an incandescence
15.17.2. Back lamp
+
15.17.3. Top stoplight
15.17.4. Illumination of a combination of devices
15.17.5. Illumination of registration plate
15.17.6. Salon illumination
+
15.18. Screen wiper engine
15.19. Combination of devices
15.20. Sound signal
15.21. System cruise control
15.22. Window regulators with an electric drive
15.23. System of the central blocking of locks
15.24. Rear-view mirrors with the electric drive
15.25. Safety airbag
+
15.26. Electric equipment schemes
15.17. Replacement of bulbs of an incandescence
15.17.1. Turns and marker lights
GENERAL INFORMATION
Elements of fastening of a forward dimensional lamp
Arrangement of screws of fastening and sequence of removal of a lateral lamp and lamp of turns from a front bumper
PERFORMANCE ORDER
1.
Open a cowl and unscrew the screw which the lamp of dimensional light to a wing fixes. Turn the holder of a bulb counter-clockwise and take it from a lamp (see fig.
Elements of fastening of a forward dimensional lamp
).
2.
Unscrew screws and consistently take from a bumper a lateral lamp and a lamp of turns. For removal of a bulb turn it counter-clockwise (see fig.
An arrangement of screws of fastening and sequence of removal of a lateral lamp and a lamp of turns from a front bumper
).
3.
Installation is made in sequence, return to removal.