Toyota Camry

1992-1997 of release

Repair and car operation

Kamri's Toyota
+ General data
- 1. Maintenance
   1.2. Periodicity of service
   - 1.3. Maintenance
      + 1.3.1. Each 400 km or weekly
      + 1.3.2. Each 5 000 km or 3 months
      + 1.3.3. Each 10 000 km or 6 months
      - 1.3.4. Each 25 000 km or 12 months
         - 1.3.4.1.1. Disk brakes
            1.3.4.1.2. Drum-type brakes
            1.3.4.1.3. Check of the vacuum amplifier of brakes
            1.3.4.1.4. Check of the hand brake
            1.3.4.1.5. Free wheeling and height of installation of a pedal of a brake
         1.3.4.2. Replacement of the air filter
         1.3.4.3. Check of fuel system
         1.3.4.4. Check of level of oil in the main transfer
         + 1.3.4.5. Suspension bracket and steering check
         1.3.4.6. Check of a protective cover of a power shaft
      + 1.3.5. Each 50 000 km or 24 months
      + 1.3.6. Each 100 000 km or 48 months
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment

1.3.4.1.2. Drum-type brakes

GENERAL INFORMATION

Prevention

At work of brake shoes the brake dust which contains asbestos is formed, unhealthy therefore when cleaning brake shoes do not use the compressed air and do not inhale a dust.

PERFORMANCE ORDER


1. For check of thickness of a brake shoe without removal of a brake drum remove a stopper from a brake board and, using a small lamp, check a condition of brake shoes.	2. For more complete survey of brake shoes remove back brake drums.	3. Examine a condition of a frictional layer of a brake shoe. If the surface is greasy, replace a brake shoe.
	4. Examine the working brake cylinder and a condition of protective covers. In the presence of leakages of brake liquid replace the brake cylinder.
5. Examine a condition of returnable and holding springs.
6. Examine a condition of a brake drum.
7. Establish brake drums.
8. Establish wheels and lower the car.