Toyota Camry

1992-1997 of release

Repair and car operation

Kamri's Toyota
+ General data
- 1. Maintenance
   1.2. Periodicity of service
   - 1.3. Maintenance
      + 1.3.1. Each 400 km or weekly
      + 1.3.2. Each 5 000 km or 3 months
      + 1.3.3. Each 10 000 km or 6 months
      - 1.3.4. Each 25 000 km or 12 months
         + Disk brakes Replacement of the air filter Check of fuel system Check of level of oil in the main transfer
         - Suspension bracket and steering check
   On the lifted car Check of a protective cover of a power shaft
      + 1.3.5. Each 50 000 km or 24 months
      + 1.3.6. Each 100 000 km or 48 months
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment On the lifted car

1. Examine a condition of hinges of a steering shaft, existence of leaks from the steering mechanism, integrity of protective covers and consolidations.
2. Check люфт wheels for what take a wheel hands in the provision 12 and 6 of hours and try to shake it in the vertical plane. Very small люфт it is admissible, but if люфт rather big, further check is necessary to establish a source. Continue to swing a wheel while the assistant presses a foot brake. If люфт it is eliminated or it is considerably reduced that, it is probable that are damaged подшипни ки naves. If люфт it is still considerable with the pressed brake, means, there is a wear in connections and suspension bracket fastenings.
3. Now take a wheel in the provision 9 and 3 of hour and try it to shake in the horizontal plane. Existence люфта in the horizontal plane can be caused by wear in bearings of a nave or spherical hinges of steering draft. If internal or external spherical sharnirny connection worn-out, люфт will be obvious.
4. Using a big screw-driver as the lever, check wear in plugs of fastening of a suspension bracket between elements of a suspension bracket and an appendix point.