Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
+ 1. Maintenance
- 2. Engine
   2.2. Operations on engine repair on the car
   2.3. Top dead point of the first cylinder
   + 2.4. Cover of a head of the block of cylinders
   + 2.5. Inlet collector
   + 2.6. Final collector
   + 2.7. Gear belt and pulleys
   2.8. Replacement of a forward sealing ring of a cranked shaft
   2.9. Replacement of a sealing ring of a camshaft
   + 2.10. Camshaft and pushers
   + 2.11. Head of the block of cylinders
   + 2.12. Oil pallet
   + 2.13. Oil pump
   + 2.14. Drive flywheel / plate
   2.15. Replacement of a back sealing ring of a cranked shaft
   + 2.16. Suspension bracket of the power unit
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment



2.9. Replacement of a sealing ring of a camshaft

PERFORMANCE ORDER
1. Remove a gear belt, the top single pulley and a camshaft pulley.
2. Remove a back casing of a gear belt.
3. Note depth of installation of a sealing ring of a camshaft and, using a small screw-driver, take a sealing ring.
4. Clear a nest of a sealing ring and grease working edges of a new sealing ring with pure engine oil.
5. Using a tubular opravka of the corresponding diameter, establish a sealing ring on a place and on demanded depth.
6. Establish a back casing of a gear belt, a pulley of a camshaft and a gear belt.