| 1. Grease with pure engine oil cams, necks of bearings and persistent surfaces of gear wheels of a camshaft. |
|
|
2. Establish a camshaft in a head of the block of cylinders so that labels on a gear wheel (two points) were directed to a camshaft operating inlet valves.
|
|
3. Apply a thin film hermetic on an external part of interfaced surfaces of a forward cover of a camshaft. |
| 4. Establish a cover of bearings of a camshaft so that shooters on covers were directed to a forward part of the engine. |
|
|
5. Tighten bolts of fastening of covers of bearings of a camshaft, turning them for one pass on 1/3 turns in an order shown in drawing.
|
| 6. Establish a new sealing ring of a camshaft. |