Toyota Camry

1992-1997 of release

Repair and car operation

Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
- 6. Fuel system
   6.2. General information
   6.3. Pressure removal in fuel system
   - 6.4. Check of the fuel pump
      6.4.2. Check of the pressure created by the fuel pump
      6.4.3. Check of a regulator of pressure of fuel
      - 6.4.4. Check of the relay of the fuel pump
         - 6.4.4.1. Models 1992 and 1993 of year
            6.4.4.1.2. Relay of break of a chain (four-cylinder engines)
            6.4.4.1.3. Relay of break of a chain of six-cylinder engines
         + 6.4.4.2. Models 1994 and 1995 of year
   6.5. Fuel pump
   + 6.6. Fuel level sensor
   6.7. Fuel tank
   6.8. Air filter
   + 6.9. Accelerator cable
   6.10. Electronic system of injection of EFL fuel
   + 6.11. Fuel system
   6.12. Check of system of injection of fuel
   + 6.13. Check and replacement of elements of system of injection of EFI fuel
   6.14. Fuel highway and fuel nozzles
   + 6.15. Valve of a mode of idling of central air of air
   6.16. Air inlet chamber (only V6 engines)
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment

6.4.4.1.3. Relay of break of a chain of six-cylinder engines

PERFORMANCE ORDER

	1. Using an ohmmeter, check resistance of the relay of break of a chain between ST and E1 contacts and contacts of ID and IC which should be equal 0. Resistance between contacts In and to FR should be equal to infinity.
	2. Using additional wires, connect the accumulator to contacts of the relay of break of a chain of ST and Е1. Thus resistance between contacts +В and FP should be equal 0.