Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
- 6. Fuel system
   6.2. General information
   6.3. Pressure removal in fuel system
   + 6.4. Check of the fuel pump
   6.5. Fuel pump
   + 6.6. Fuel level sensor
   6.7. Fuel tank
   6.8. Air filter
   - 6.9. Accelerator cable
      6.9.2. Installation and adjustment
   6.10. Electronic system of injection of EFL fuel
   + 6.11. Fuel system
   6.12. Check of system of injection of fuel
   + 6.13. Check and replacement of elements of system of injection of EFI fuel
   6.14. Fuel highway and fuel nozzles
   + 6.15. Valve of a mode of idling of central air of air
   6.16. Air inlet chamber (only V6 engines)
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment



6.9.2. Installation and adjustment

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.
2. Press against the stop a pedal of an accelerator and check that the butterfly valve is completely open.
3. If the butterfly valve does not open completely by full pressing of a pedal of an accelerator, weaken a lock-nut and move a cover of a cable of an accelerator to such situation when the butterfly valve will be completely open.
4. Tighten a lock-nut of fastening of a cover of a cable of an accelerator and repeatedly check adjustment.