| 1. Remove a weight wire from the accumulator. |
| 2. Disconnect electric sockets from the ignition distributor. |
| 3. On a cover of the distributor note situation высоковольт a foot of a wire of the first cylinder. |
| 4. Uncover the distributor and turn a cranked shaft of the engine so that the rotor of the distributor was directed to the plug of a high-voltage wire of the first cylinder. |
|
|
5. On the case of the distributor put a label located opposite to a contact part of a rotor of the distributor. |
|
|
6. Also note position of the case of the distributor in relation to the block of cylinders. |
|
7. Unscrew bolts and remove the ignition distributor. |