Toyota Camry

1992-1997 of release

Repair and car operation

Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
- 8. Toxicity fall
   8.2. General information
   8.3. System of electronic control (TCCS)
   8.4. Self-diagnostics system
   + 8.5. Sensors
   - 8.6. Induction system of supply of air in the engine (ACIS)
      8.6.1. Replacement
   8.7. Catching system паров fuels (EVAP)
   + 8.8. System of repeated burning of exhaust gases (EGR)
   8.9. System of ventilation of a case (PCV)
   8.10. Catalyst
   8.11. Codes of malfunctions
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment

8.6.1. Replacement

GENERAL INFORMATION

Preventions

At existence in a code radio receiver against theft, before an accumulator detachment, check that you have connection codes.

On models since 1993 the system of an airbag of safety is disconnected, if the accumulator is disconnected for long term. If a control lamp of a safety cushion it lights up and necessary to burn after repeated connection of the accumulator, it is necessary to address in a specialized workshop for restoration of operability of system.

Details of the adjusting valve of induction system of supply of air

PERFORMANCE ORDER

1. Remove a weight wire from the accumulator.

2. On the engine 3VZ-FE disconnect the electric socket from a fuel nozzle of cold start and a hose of supply of fuel.

3. Disconnect vacuum hoses from the vacuum amplifier of brakes, the valve of a mode of idling of central air and the regulating valve.

4. Unscrew bolts and remove assembly of the regulating valve from the air inlet chamber.

5. Clear interfaced surfaces of the chamber воздухозаборни and cases of the regulating valve.

6. Installation is made in sequence, return to removal. Thus it is necessary to use new laying.