Toyota Camry

1992-1997 of release

Repair and car operation

Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
- 12. Brake system
   12.2. General information
   12.3. Anti-blocking system of brakes (ABS)
   12.4. Replacement of brake shoes of disk brakes
   + 12.5. Support of disk brakes
   + 12.6. Brake disk
   12.7. Replacement of brake shoes of drum-type brakes
   + 12.8. Working brake cylinder
   - 12.9. Main brake cylinder
      12.9.2. Repair
      12.9.3. Installation
   12.10. Brake pipelines and hoses
   12.11. Pumping of hydraulic brake system
   + 12.12. Vacuum amplifier of brakes
   12.13. Replacement of brake shoes of the hand brake on back disk brakes
   + 12.14. Adjustment of the parking brake
   + 12.15. Replacement of a cable of the hand brake
   + 12.16. Stoplight switch
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment

12.9.3. Installation

1. Establish the main brake cylinder on racks of the vacuum amplifier of brakes and fix nuts, having tightened them at this stage by hand.
2. Unscrew from the main brake cylinder carving jams and on their place screw in brake pipelines.
3. Finally tighten nuts of fastening of the main brake cylinder.

4. Remove air from the main brake cylinder, got there at installation of brake tubes. Sharply press a brake pedal, unscrew on a turn floor a nut of fastening of a brake tube to the main brake cylinder at the pressed pedal. Continuing to press a pedal, force out the liquid which was in system together with air. After the pedal will reach extreme forward situation and the effluence of liquid will stop, screw up a nut of fastening of the pipeline. Repeat these operations, the air outlet from the main brake cylinder will not stop yet.