Toyota Camry

1992-1997 of release

Repair and car operation

Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
- 8. Toxicity fall
   8.2. General information
   8.3. System of electronic control (TCCS)
   8.4. Self-diagnostics system
   - 8.5. Sensors
      8.5.2. Oxygen sensor
      8.5.3. Sensor of provision of a butterfly valve
      8.5.4. Measuring instrument of a stream of air (only V6 engines 3VZ-FE)
      8.5.5. MAF sensor of measurement of weight of a stream of air (V6 engine 1MZ-FE)
      8.5.6. Sensor of absolute pressure (four-cylinder engines)
      8.5.7. Sensor of temperature of EGR
      8.5.8. Sensor of speed of the car
      8.5.9. The detonation sensor (only with V6 engines)
      8.5.10. Sensor of provision of a camshaft (V6 engine 1MZ-FE)
      8.5.11. Sensor of an angle of rotation of a cranked shaft (only V6 engines 1MZ-FE)
   + 8.6. Induction system of supply of air in the engine (ACIS)
   8.7. Catching system паров fuels (EVAP)
   + 8.8. System of repeated burning of exhaust gases (EGR)
   8.9. System of ventilation of a case (PCV)
   8.10. Catalyst
   8.11. Codes of malfunctions
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment

8.5.9. The detonation sensor (only with V6 engines)


The sensor of a detonation defines a detonation in cylinders of the engine and transmits an operating signal to the ESM block which reduces a corner of an advancing of ignition by the size excluding a detonation in cylinders of the engine.


1. Sensors of a detonation are located under an inlet collector. For access to sensors of a detonation it is necessary to remove the chamber of an air inlet and an inlet collector.
2. Using an ohmmeter, check that there is no contact between contacts of the sensor of a detonation and the engine.