Toyota Camry

1992-1997 of release

Repair and car operation


Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
- 10. Automatic transmission
   10.2. General information
   + 10.3. Diagnostics
   + 10.4. Adjustment and replacement of a cable of a choice of transfers
   10.5. Check and adjustment of a cable of management by a butterfly valve
   + 10.6. Check, replacement and adjustment of the switch of blocking of a starter
   + 10.7. Lock of blocking of the lever of a choice of transfers
   + 10.8. Replacement of sealing rings
   + 10.9. Check and replacement of support of a transmission
   10.10. Electronic control system
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment



10.10. Electronic control system
GENERAL INFORMATION

Arrangement of elements of an electronic control system of an automatic transmission on the car
1–switch of blocking of a starter;
2–locking solenoid;
3–sensor of speed No. 1;
4–the sensor of temperature of cooling liquid;
5–electric socket of data 1;
6–ESM block;
7–sensor of provision of a butterfly valve;
8–About/D switch;
9–switch;
10-indicator;
11-combination of devices;
12-DLC2 (socket of a conclusion of data No. 2);
13-stoplight switch;
14-sensor of speed No. 2;
15-ignition coil

The electronic control system of a transmission has self-diagnostics function. In the presence of malfunctions in a transmission they register in the ESM block in the form of codes, the control lamp thus lights up. Definition of codes of malfunction of an automatic transmission can be made as follows.

PERFORMANCE ORDER
1. Include ignition.
2. Move the main About/D switch into position.
3. Using an additional wire, connect contacts Е1 and TE1 in the control socket.
4. For definition of a code of malfunction count number of flashes of a control lamp. The number of flashes of a control lamp to a pause defines the first of a code of malfunction, and the number of flashes after a pause defines the second of a code of malfunction.
5. After malfunction elimination for deleting of a code of malfunction from memory switch off ignition and take EFI1 safety lock for the period of more than 10 seconds.

Malfunction codes

Malfunction code Defect
42 the sensor of speed No. 1, the sensor of a drive of a speedometer or their electric chains is faulty
61 the sensor of speed No. 2 or its electric chain is faulty
62 the solenoid of the lock No. 1 or its electric chain is faulty
63 the solenoid of the lock No. 2 or its electric chain is faulty