Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
- 8. Toxicity fall
   8.2. General information
   8.3. System of electronic control (TCCS)
   8.4. Self-diagnostics system
   + 8.5. Sensors
   + 8.6. Induction system of supply of air in the engine (ACIS)
   8.7. Catching system паров fuels (EVAP)
   + 8.8. System of repeated burning of exhaust gases (EGR)
   8.9. System of ventilation of a case (PCV)
   8.10. Catalyst
   8.11. Codes of malfunctions
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment
вакансии - Москва



8.2. General information

GENERAL INFORMATION

System of fall of toxicity of exhaust gases of the four-cylinder engine
1–diagnostic socket;
2–vacuum EGR modulator;
3–EGR valve;
4–MAP sensor;
5–
TPF (behind the throttle case);
6–the sensor of temperature of cooling liquid;
7–ignition distributor;
8–the ignition block (behind the air filter);
9–oxygen sensor

System of fall of toxicity of exhaust gases of the six-cylinder engine
1–the regulating air valve;
2–diagnostic socket;
3–vacuum EGR modulator;
4–EGR valve;
5–TPS (behind the throttle case);
6–ignition block;
7–NAF sensor;
8–sensor of provision of a camshaft;
9–oxygen sensor;
10-ignition coils (located under a casing)

The typical chart of an arrangement of vacuum hoses on the four-cylinder engine

 

The typical chart of an arrangement of vacuum hoses on the V6 engine 3VZ-FE

 

Schematical arrangement of vacuum hoses on the V6 engine 1MZ-FE

 

The identification plate with data of system of fall of toxicity of exhaust gases, turns of idling and coal of an advancing of ignition
 

The identification plate with a schematical arrangement of vacuum hoses
 


To reduce atmosphere pollution from short burned hydrocarbons and evaporating gases and to create optimum conditions for operation of the engine, the following systems of fall of toxicity of exhaust gases are applied:

– system of ventilation of a case;
– catching system паров fuels (EVAP);
– system of repeated burning of exhaust gases (EGR);
– catalyst (TWC);
– electronic system of injection of fuel (EFI);
– induction system of supply of air.