Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
- 8. Toxicity fall
   8.2. General information
   8.3. System of electronic control (TCCS)
   8.4. Self-diagnostics system
   - 8.5. Sensors
      8.5.2. Oxygen sensor
      8.5.3. Sensor of provision of a butterfly valve
      8.5.4. Measuring instrument of a stream of air (only V6 engines 3VZ-FE)
      8.5.5. MAF sensor of measurement of weight of a stream of air (V6 engine 1MZ-FE)
      8.5.6. Sensor of absolute pressure (four-cylinder engines)
      8.5.7. Sensor of temperature of EGR
      8.5.8. Sensor of speed of the car
      8.5.9. The detonation sensor (only with V6 engines)
      8.5.10. Sensor of provision of a camshaft (V6 engine 1MZ-FE)
      8.5.11. Sensor of an angle of rotation of a cranked shaft (only V6 engines 1MZ-FE)
   + 8.6. Induction system of supply of air in the engine (ACIS)
   8.7. Catching system паров fuels (EVAP)
   + 8.8. System of repeated burning of exhaust gases (EGR)
   8.9. System of ventilation of a case (PCV)
   8.10. Catalyst
   8.11. Codes of malfunctions
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment



8.5. Sensors

8.5.1. The sensor of temperature of cooling liquid

GENERAL INFORMATION

Dependence of resistance of the sensor of temperature of cooling liquid on temperature
 

Arrangement of the sensor of temperature of cooling liquid on the four-cylinder engine
 

The sensor of temperature of cooling liquid is a termistor which changes the resistance depending on temperature. At reduction of temperature of the sensor its resistance increases, and at increase in temperature сопротивле the scientific research institute decreases.

PERFORMANCE ORDER

1. For check of the sensor of temperature of cooling liquid measure its resistance at various temperatures.

2. If necessary check an electric chain of the sensor of temperature of cooling liquid.
3. For removal of the sensor remove from it the electric socket and unscrew the sensor.