Toyota Camry

1992-1997 of release

Repair and car operation

Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
- 9. Transmission
   9.2. General information
   9.3. Gear shifting cables
   9.4. Gear shifting lever
   9.5. Switch of light of a backing
   + 9.6. Removal and transmission installation
   9.7. Transmission repair
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment

9.4. Gear shifting lever

GENERAL INFORMATION

Recommendation

Before installation of the central console on models 1992 and 1993 of year, using spring scales, check the effort necessary for moving of the lever of gear shifting.

If the effort of moving of the lever of gear shifting does not correspond to norm, remove the lever of gear shifting and establish laying of the corresponding thickness (see tab. Thickness of the adjusting laying used for change of effort, gear shifting enclosed to the lever for its moving).
Use of thicker laying increases effort which is necessary for putting to the lever for its moving.

PERFORMANCE ORDER

1. Remove the central console.
2. Remove clamps and disconnect both cables of gear shifting from the gear shifting lever.
3. Unscrew bolts and remove assembly of the lever of gear shifting.
4. Installation is made in sequence, return to removal.

Thickness of the adjusting laying used for change of effort, gear shifting enclosed to the lever for its moving

Label	Thickness, mm
A	0,5
B	0,6
C	0,7
D	0,8
E	0,9
F	1,0
G	1,1
H	1,2
J	1,3
K	1,4
L	1,5
M	1,6
N	1,7