Toyota Camry

1992-1997 of release

Repair and car operation

Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
- 9. Transmission
   9.2. General information
   9.3. Gear shifting cables
   9.4. Gear shifting lever
   9.5. Switch of light of a backing
   - 9.6. Removal and transmission installation
      9.6.2. Installation
   9.7. Transmission repair
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment

9.6. Removal and transmission installation

9.6.1. Removal

1. Remove a cowl.
2. Reduce pressure in fuel system.
3. Remove a weight wire from the accumulator.

At existence in a code radio receiver against theft, before a detachment of the accumulator check that you have connection codes.

On models since 1993 the system of an airbag of safety is disconnected, if the accumulator is disconnected for long term. If a control lamp of a safety cushion it lights up and necessary to burn after repeated connection of the accumulator, it is necessary to address in a specialized workshop for restoration of operability of system.

4. Disconnect the electric socket, unscrew bolts and remove the executive mechanism cruise control.
5. Remove the accumulator and an accumulator support.
6. Remove an air inlet and a casing of the air filter.
7. Disconnect from the engine топливопроводы and close them jams.
8. Remove the fuel filter together with an arm.
9. Remove the charcoal canister.
10. Remove a tank of a washer of a windscreen and a broad tank.
11. Disconnect a cable of an accelerator and a control cable of average speed from the throttle case.
12. Mark and disconnect vacuum hoses, hoses of supply of cooling liquid, ventilation hoses, electric sockets and grounding tires.
13. Remove radiator fans together with casings. Merge cooling liquid and remove a radiator. Disconnect hoses of supply of cooling liquid to a heater.
14. Remove a gear shifting cable from a transmission.
15. Lift the car and fix on supports. Remove wheels.
16. Disconnect a reception exhaust pipe from a collector.
17. Remove mudguards.
18. Merge from the engine engine oil.
19. Remove driving belts.
20. Merge oil from a transmission.
21. Disconnect hinges of power shafts from a transmission.
22. On models with the amplifier of a steering unscrew bolts of fastening of the pump of the amplifier of a steering and move it aside, without disconnecting from it hoses.
23. On models with air conditioning unscrew bolts of fastening of the compressor and move the compressor aside, without disconnecting from it hoses.
24. On models with four-cylinder engines with an oil radiator remove the oil filter and disconnect hoses from an oil radiator.
25. Remove the working cylinder of coupling and hoses.
26. Hook on the power unit the load-lifting mechanism and raise so, that weight of the power unit восприни мался the load-lifting mechanism.
27. Unscrew support of the power unit.
28. Check that anything else does not connect the power unit to a motor compartment of the car.
29. Being careful, slowly lift the power unit from a motor compartment of the car.
30. Establish the power unit on wooden bars.
31. Remove a starter.
32. If necessary remove coupling and check its condition.