Toyota Camry

1992-1997 of release

Repair and car operation

Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
- 14. Body
   14.1.1. Security measures at carrying out welding works
   + 14.2. Care of a body
   + 14.3. Care of an upholstery and rugs
   + 14.4. Repair of insignificant damages of a body
   14.5. Repair of strong damages of a body
   + 14.6. Cowl
   14.7. Trunk lid
   14.8. Back door
   + 14.9. Replacement of racks of support
   14.10. Door upholstery
   + 14.11. Doors
   + 14.12. Lock, cylinder of the lock and handle of opening of a door
   14.13. Door glass
   14.14. Window regulator
   14.15. Front bumper
   14.16. Rear bumper
   14.17. External rear-view mirrors
   + 14.18. Seats
   14.19. Decorative overlay of a combination of devices
   14.20. Casings of a steering column
   14.21. Central console
   14.22. Ware box
   14.23. Check of a condition of seat belts
   14.24. Front grille
   14.25. Engine mudguard
+ 15. Electric equipment

14.13. Door glass


Forward door
1–illumination lamp;
3–decorative overlay of the internal handle;
4–internal handle of opening of a door;
5–internal arm of a door;
6–a lobby bottom directing glasses;
7–window regulator;
8–back bottom directing glasses;
9–consolidation of a forward door;
10-shock plate of the lock of a door;
11-cylinder of the lock of a door;
12-external handle;
13-door lock;
14-drafts of the lock of a door;
15-door glass;
16-directing door glasses;
17-overlay of a frame of glass of a door;
18-top slip;
19-external slip;
20-decorative overlay of a mirror;
21-rear-view mirror;
22-door hinge;
23-limiter of opening of a door;
24-draft of remote control by the door lock;
25-door hinge;
26-protective film;
27-internal consolidation of glass of a door;
29-door upholstery;
30-loudspeaker lattice;
32-lock ring;
33-regulator handle;
34-window regulator switch;
35-door pocket

1. Remove an upholstery of a door and a protective film.
2. Lower door glass.
3. Pull up and take from fastening brackets external consolidation of glass of a door. Unscrew screws and remove back directing glasses and the top frame of a window. Take from brackets of fastening and remove slips (see fig. Forward door).
4. Unscrew two bolts and remove door glass from a window regulator.
5. Take door glass up doors.
6. Installation is made in sequence, return to removal.