Toyota Camry

1992-1997 of release

Repair and car operation

Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
- 14. Body
   14.1.1. Security measures at carrying out welding works
   + 14.2. Care of a body
   + 14.3. Care of an upholstery and rugs
   + 14.4. Repair of insignificant damages of a body
   14.5. Repair of strong damages of a body
   + 14.6. Cowl
   14.7. Trunk lid
   14.8. Back door
   + 14.9. Replacement of racks of support
   14.10. Door upholstery
   + 14.11. Doors
   + 14.12. Lock, cylinder of the lock and handle of opening of a door
   14.13. Door glass
   14.14. Window regulator
   14.15. Front bumper
   14.16. Rear bumper
   14.17. External rear-view mirrors
   + 14.18. Seats
   14.19. Decorative overlay of a combination of devices
   14.20. Casings of a steering column
   14.21. Central console
   14.22. Ware box
   14.23. Check of a condition of seat belts
   14.24. Front grille
   14.25. Engine mudguard
+ 15. Electric equipment

14.15. Front bumper


Front bumper and elements of its fastening
1–front grille;
3–forward index of turns;
4–bottom clamp;
5–control lamp of turns;
6–overlay of a bumper;
7–bumper clamp;
8–lateral fastening of a bumper;
9–top clamp;
10-forward amplifier of a bumper;
14-top fastening;
15-engine mudguard;
16-protection of the right wing;
17-protection of the left wing;
18-engine mudguard;
19-air resonator;
21-absorber of energy of a bumper;
22-suspension bracket plates;
23-lateral fastening of a bumper;
24-bumper clamp;
25-control lamp of turns;
26-forward index of turns

1. Lift a forward part of the car and fix on supports.
2. Remove a weight wire from the accumulator. Disconnect electric sockets which can interfere with removal of a front bumper.
3. Remove a front grille, headlights, forward indexes of turn and repeaters of turns.
4. Remove protection of forward wings.
5. Remove mudguards of the engine and the air resonator.
6. Unscrew bolts and nuts of fastening and remove an overlay of a bumper and an energy absorber.
7. Unscrew bolts and remove the amplifier of a bumper.
8. Installation is made in sequence, return to removal.