Toyota Camry

1992-1997 of release

Repair and car operation

Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
- 9. Transmission
   9.2. General information
   9.3. Gear shifting cables
   9.4. Gear shifting lever
   9.5. Switch of light of a backing
   - 9.6. Removal and transmission installation
      9.6.2. Installation
   9.7. Transmission repair
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment

Эвакуатор авто на www.химки-эвакуатор.рф.
Библиотеки для kontakt 5 еще здесь.
купить диплом Нижний Новгород АртДиплом.
скрадок на тетерева купить

9.6.2. Installation

1. Put a small amount of high-temperature greasing on the bearing in an end face of a cranked shaft.
2. Being careful, establish a transmission on the engine and fix bolts, having tightened them the demanded moment.
3. Being careful, establish the power unit in a motor compartment of the car.
4. Establish support of the power unit and fix them bolts.
5. Further installation is made in sequence, return to removal.
6. Fill in cooling liquid in system of cooling of the engine, engine oil in the engine and oil in a transmission. Start the engine and check it on absence of leaks.
7. Switch off the engine and repeatedly check level of cooling liquid and engine oil.