Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
- 11. Coupling and power shafts
   11.2. General information
   + 11.3. Check and replacement of a disk of coupling
   - 11.4. Vyzhimna bearing
      11.4.2. Check
      11.4.3. Installation
   + 11.5. Main cylinder of coupling
   + 11.6. Working cylinder of coupling
   11.7. Air removal from hydraulic system of coupling
   11.8. Starting switch of coupling
   + 11.9. Hinge of equal angular speeds (CV JOINT)
   + 11.10. Replacement of protective covers and repair of hinges of equal angular speeds
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment



11.4.3. Installation

PERFORMANCE ORDER
1. Apply a thin film high-temperature greasing on an internal surface of the vyzhimny bearing, a shlitsa of primary shaft and directing plug of the vyzhimny bearing.
2. Apply a thin film high-temperature greasing on places of a fork of switching off the couplings contacting to the vyzhimny bearing, a hairpin with a spherical tip and a pusher.
3. Establish vyzhimny the bearing on a fork of switching off of coupling.
4. Establish vyzhimny the bearing on directing plug in a forward part of a transmission. Thus a fork of switching off of coupling pass through an opening in a coupling case. Establish a fork of switching off of coupling on a hairpin with a spherical tip before fixing it.
5. Apply a thin film high-temperature greasing on the forward party of the vyzhimny bearing contacting to a diafragmenny spring of a press disk.
6. Further installation is made in sequence, return to removal.