Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
- 12. Brake system
   12.2. General information
   12.3. Anti-blocking system of brakes (ABS)
   12.4. Replacement of brake shoes of disk brakes
   + 12.5. Support of disk brakes
   + 12.6. Brake disk
   12.7. Replacement of brake shoes of drum-type brakes
   + 12.8. Working brake cylinder
   + 12.9. Main brake cylinder
   12.10. Brake pipelines and hoses
   12.11. Pumping of hydraulic brake system
   + 12.12. Vacuum amplifier of brakes
   12.13. Replacement of brake shoes of the hand brake on back disk brakes
   + 12.14. Adjustment of the parking brake
   + 12.15. Replacement of a cable of the hand brake
   + 12.16. Stoplight switch
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment



12.10. Brake pipelines and hoses

GENERAL INFORMATION

Unscrewing of brake tubes
When unscrewing brake tubes it is necessary to use a cap wrench.

Unscrewing of a brake hose from a brake tube
When unscrewing a brake hose from a brake tube they are necessary for taking previously from a fastening bracket.

Brake tubes and hoses are applied to transfer of brake liquid from the main brake cylinder to working brake cylinders. Connection of tubes with brake cylinders and switching centers is made by konusny couplings. The ends of tubes are pressed out and have a cone-shaped form for the corresponding size of konusny carving openings in brake cylinders or switching centers.

PERFORMANCE ORDER

1. Before obzhatiy the ends of tubes the lock nut which after a vvinchivaniye of a cone-shaped surface in the konusny bases of a carving opening presses is put on them and pressurizes a tube.

2. Brake hoses carry out mobile communications between mobile and motionless parts of the car. For reduction of losses of brake liquid at removal of working brake cylinders clips for a perezhatiya of brake hoses are used.