Repair and Toyota Camry car operation - 12.9. Main brake cylinder//Kamri's Toyota of 1992-1997 / frndl.ru

Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
- 12. Brake system
   12.2. General information
   12.3. Anti-blocking system of brakes (ABS)
   12.4. Replacement of brake shoes of disk brakes
   + 12.5. Support of disk brakes
   + 12.6. Brake disk
   12.7. Replacement of brake shoes of drum-type brakes
   + 12.8. Working brake cylinder
   - 12.9. Main brake cylinder
      12.9.2. Repair
      12.9.3. Installation
   12.10. Brake pipelines and hoses
   12.11. Pumping of hydraulic brake system
   + 12.12. Vacuum amplifier of brakes
   12.13. Replacement of brake shoes of the hand brake on back disk brakes
   + 12.14. Adjustment of the parking brake
   + 12.15. Replacement of a cable of the hand brake
   + 12.16. Stoplight switch
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment
вакансии - Москва



12.9. Main brake cylinder

12.9.1. Removal

GENERAL INFORMATION

Main brake cylinder
1–an adapter with three tubes;
2–an adapter with two tubes;
3–main brake cylinder;
4–laying;
5–vacuum amplifier of brakes

PERFORMANCE ORDER
1. Disconnect the electric socket from a tank with brake liquid.
2. Uncover a tank of brake system and, using a syringe, pump out brake liquid.
3. Mark the brake tubes suitable to the main brake cylinder. Arrange pure rags under the main brake cylinder. Unscrew nuts of fastening of brake tubes and take aside from the main brake cylinder brake tubes. Close the ends of tubes the corresponding jams.
4. Unscrew nuts of fastening and remove the main brake cylinder from the vacuum amplifier of brakes together with laying