Repair and Toyota Camry car operation - 12.8. Working brake cylinder//Kamri's Toyota of 1992-1997 / frndl.ru

Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
- 12. Brake system
   12.2. General information
   12.3. Anti-blocking system of brakes (ABS)
   12.4. Replacement of brake shoes of disk brakes
   + 12.5. Support of disk brakes
   + 12.6. Brake disk
   12.7. Replacement of brake shoes of drum-type brakes
   - 12.8. Working brake cylinder
      12.8.2. Repair
      12.8.3. Installation
   + 12.9. Main brake cylinder
   12.10. Brake pipelines and hoses
   12.11. Pumping of hydraulic brake system
   + 12.12. Vacuum amplifier of brakes
   12.13. Replacement of brake shoes of the hand brake on back disk brakes
   + 12.14. Adjustment of the parking brake
   + 12.15. Replacement of a cable of the hand brake
   + 12.16. Stoplight switch
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment
вакансии - Москва



12.8. Working brake cylinder

12.8.1. Removal

PERFORMANCE ORDER
1. Lift a back part of the car and fix on supports.
2. Remove a brake drum.
3. Using a clip, press a brake hose in a place closest to the working brake cylinder.

4. Remove dirt round a junction of a brake hose and a back part of the working brake cylinder. Unscrew a connecting nut. Being careful, take a brake pipe from the working brake cylinder and close it a stopper.

5. Unscrew two bolts of fastening of the working brake cylinder to a brake board. Being careful, remove the working brake cylinder.