Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
- 12. Brake system
   12.2. General information
   12.3. Anti-blocking system of brakes (ABS)
   12.4. Replacement of brake shoes of disk brakes
   + 12.5. Support of disk brakes
   + 12.6. Brake disk
   12.7. Replacement of brake shoes of drum-type brakes
   + 12.8. Working brake cylinder
   + 12.9. Main brake cylinder
   12.10. Brake pipelines and hoses
   12.11. Pumping of hydraulic brake system
   - 12.12. Vacuum amplifier of brakes
      12.12.2. Removal
      12.12.3. Installation
   12.13. Replacement of brake shoes of the hand brake on back disk brakes
   + 12.14. Adjustment of the parking brake
   + 12.15. Replacement of a cable of the hand brake
   + 12.16. Stoplight switch
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment
вакансии - Москва



12.12.2. Removal

GENERAL INFORMATION

Elements of the vacuum amplifier of brakes
1–main brake cylinder;
2–laying;
3–vacuum hose;
4–laying;
5–pin;
6–fork;
7–fastening bracket;
8–vacuum amplifier of brakes

PERFORMANCE ORDER
1. Remove the main brake cylinder.
2. On models 1992 and 1993 of year remove a clip of a plait of wires from the lower part of the vacuum amplifier of brakes.
3. Weaken fastening and move down the charcoal canister.
4. Disconnect a vacuum hose from the vacuum amplifier of brakes.
5. In salon of the car remove a casing of a steering column.
6. Disconnect a pusher of the vacuum amplifier of brakes from the top part of a pedal of a brake.
7. Unscrew 4 nuts of fastening and take the vacuum amplifier of brakes from a motor compartment.