Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
- 12. Brake system
   12.2. General information
   12.3. Anti-blocking system of brakes (ABS)
   12.4. Replacement of brake shoes of disk brakes
   + 12.5. Support of disk brakes
   + 12.6. Brake disk
   12.7. Replacement of brake shoes of drum-type brakes
   + 12.8. Working brake cylinder
   + 12.9. Main brake cylinder
   12.10. Brake pipelines and hoses
   12.11. Pumping of hydraulic brake system
   + 12.12. Vacuum amplifier of brakes
   12.13. Replacement of brake shoes of the hand brake on back disk brakes
   - 12.14. Adjustment of the parking brake
      12.14.2. Pedal drive
   + 12.15. Replacement of a cable of the hand brake
   + 12.16. Stoplight switch
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment



12.14.2. Pedal drive

PERFORMANCE ORDER
1. Slowly press a pedal of the parking brake against the stop. Thus the course of a pedal should make from 3 to 5 clicks. If a pedal course less than 3 clicks, blocks of the parking brake not completely depart from a brake disk. If course more than 6 clicks, parking brake not затормаживает car.
2. Remove the central console.

3. Weaken a lock-nut and, rotating an adjusting nut, отрегули руйте the provision of a cable so that the course of a pedal made 3–6 clicks. Tighten a lock-nut.
4. Establish the central console.
5. Establish a brake disk.