Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
- 1. Maintenance
   1.2. Periodicity of service
   - 1.3. Maintenance
      + 1.3.1. Each 400 km or weekly
      + 1.3.2. Each 5 000 km or 3 months
      - 1.3.3. Each 10 000 km or 6 months
         1.3.3.1.1. Type A
         1.3.3.1.2. Type B
         1.3.3.2. Check of a free wheeling and height of installation of a pedal of coupling
         + 1.3.3.3. Check and accumulator service
         + 1.3.3.4. Check and replacement of a driving belt
         - 1.3.3.5. Check of tightness of hoses and effluence of liquids
            1.3.3.5.1. Fuel hoses
            1.3.3.5.2. Unknown leakages of liquids
            1.3.3.5.3. Vacuum hoses
         1.3.3.6. Check of system of cooling
         1.3.3.7. Change of provision of installation of tires
      + 1.3.4. Each 25 000 km or 12 months
      + 1.3.5. Each 50 000 km or 24 months
      + 1.3.6. Each 100 000 km or 48 months
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment
наращивание ресниц
IQ Option пополнить счет Что такое биномо опцион сайт.
Как заказать технический паспорт бти источник.
вакансии - Москва



1.3.3.5. Check of tightness of hoses and effluence of liquids

GENERAL INFORMATION

Defects of hoses of system of cooling
 

Leak in system of cooling is usually found on white or colors of a rust to a raid in the area adjoining leak.

PERFORMANCE ORDER

1. Carefully check a radiator and hoses of cooling liquid on all length. Replace hoses with cracks, gaps and aging signs. Cracks are easier for finding if to press a hose. Pay special attention to collars which attach hoses to elements of system of cooling. Collars of fastening of a hose which were strongly tightened, can cause a gap or a hose puncture, leaks in cooling system will be result of that.

2. Examine all components of system of cooling (hoses, surfaces of sockets etc.) about leaks. If обнаруже ны any problems of similar character with system components, replace this component or laying.