Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
- 13. Suspension bracket
   13.2. General information
   + 13.3. Forward stabilizer of cross-section stability
   + 13.4. The lobby is resistant
   13.5. Repair of a forward rack
   + 13.6. Bottom lever of a forward suspension bracket
   13.7. Replacement of the bottom hinge of a forward suspension bracket
   + 13.8. Rotary fist
   13.9. Back stabilizer of cross-section stability
   + 13.10. Rack of a back suspension bracket
   13.11. Longitudinal draft of a back suspension bracket
   + 13.12. Levers of a back suspension bracket
   + 13.13. Nave of a back suspension bracket
   - 13.14. Fixing element of a back nave
      13.14.2. Installation
   + 13.15. Steering wheel
   + 13.16. Tips of steering draft
   13.17. Replacement of protective covers of steering transfer
   + 13.18. Steering transfer
   + 13.19. Pump of the amplifier of a steering
   13.20. Air removal from steering system with the amplifier
   + 13.21. Wheels and tires
   13.22. Corners of installation of wheels
+ 14. Body
+ 15. Electric equipment
вакансии - Москва




13.14. Fixing element of a back nave

13.14.1. Removal

GENERAL INFORMATION

Fixing element of a nave of a back suspension bracket
1–sensor of speed of a wheel;
2–fixing element of a back suspension bracket;
3–support;
4–nave;
5–brake disk;
6–sealing ring of round section

PERFORMANCE ORDER
1. Lift a back part of the car and fix on supports. Remove a back wheel.

2. Remove a back brake drum or a support and a brake disk. On models with back brake drums отсоеди threads a brake tube from the working brake cylinder.

3. Remove a back nave.
4. On models with back brake drums remove a brake board from a fixing element of a nave. On models with back disk brakes remove a brake board and knot of the hand brake from a fixing element of a nave. Using a soft wire, adhere a brake board to a spring of a back suspension bracket.
5. On models with anti-blocking system unscrew the sensor of speed of a wheel from a fixing element of a nave.
6. On models with a body "versatile person" unscrew a nut of fastening of a spring of the restrictive valve (LSPV).
7. Weaken bolts of fastening of a rack of a back suspension bracket to a fixing element of a back nave.
8. Unscrew bolts of fastening longitudinal and cross-section levers to a fixing element.
9. Finally unscrew bolts of fastening of a rack of a back suspension bracket to a fixing element of a back nave and remove a fixing element of a back nave.