Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
- 13. Suspension bracket
   13.2. General information
   + 13.3. Forward stabilizer of cross-section stability
   + 13.4. The lobby is resistant
   13.5. Repair of a forward rack
   + 13.6. Bottom lever of a forward suspension bracket
   13.7. Replacement of the bottom hinge of a forward suspension bracket
   + 13.8. Rotary fist
   13.9. Back stabilizer of cross-section stability
   + 13.10. Rack of a back suspension bracket
   13.11. Longitudinal draft of a back suspension bracket
   + 13.12. Levers of a back suspension bracket
   + 13.13. Nave of a back suspension bracket
   + 13.14. Fixing element of a back nave
   + 13.15. Steering wheel
   + 13.16. Tips of steering draft
   13.17. Replacement of protective covers of steering transfer
   + 13.18. Steering transfer
   + 13.19. Pump of the amplifier of a steering
   13.20. Air removal from steering system with the amplifier
   + 13.21. Wheels and tires
   13.22. Corners of installation of wheels
+ 14. Body
+ 15. Electric equipment



13.20. Air removal from steering system with the amplifier

GENERAL INFORMATION

Air removal from system is necessary for making after a rassoyedineniye of hydraulic elements of system.

PERFORMANCE ORDER
1. Uncover a nutritious tank and check liquid level.
2. At the idle engine slowly several times turn a steering wheel from an emphasis against the stop to remove air from system. Repeat this operation until liquid level in a tank considerably will not decrease. Start the engine and slowly turn a steering wheel from an emphasis against the stop several times to remove air from system. Repeat this operation while bubbles will not cease to appear in a nutritious tank.
3. If at hydraulic system of the amplifier of a steering there is an extraneous noise, it specifies that in system still there is an air.
4. After air removal from system switch off the engine and give the chance to system to be cooled. Check liquid level in a tank which should be up to standard of the top label.