Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
- 13. Suspension bracket
   13.2. General information
   + 13.3. Forward stabilizer of cross-section stability
   + 13.4. The lobby is resistant
   13.5. Repair of a forward rack
   + 13.6. Bottom lever of a forward suspension bracket
   13.7. Replacement of the bottom hinge of a forward suspension bracket
   + 13.8. Rotary fist
   13.9. Back stabilizer of cross-section stability
   + 13.10. Rack of a back suspension bracket
   13.11. Longitudinal draft of a back suspension bracket
   + 13.12. Levers of a back suspension bracket
   + 13.13. Nave of a back suspension bracket
   + 13.14. Fixing element of a back nave
   + 13.15. Steering wheel
   + 13.16. Tips of steering draft
   13.17. Replacement of protective covers of steering transfer
   + 13.18. Steering transfer
   + 13.19. Pump of the amplifier of a steering
   13.20. Air removal from steering system with the amplifier
   + 13.21. Wheels and tires
   13.22. Corners of installation of wheels
+ 14. Body
+ 15. Electric equipment
вакансии - Москва




13.7. Replacement of the bottom hinge of a forward suspension bracket

PERFORMANCE ORDER
1. Lift a forward part of the car and fix on supports. Remove a forward wheel.
2. Unscrew bolts of fastening of the spherical hinge to the bottom lever of a forward suspension bracket and, using mount, separate the bottom lever from the spherical hinge.
3. Take шплинт and on some turns unscrew a nut of fastening of the spherical hinge to a rotary fist.

4. Using a stripper, squeeze out a pin of the spherical hinge from a rotary fist.

5. Unscrew a nut from a pin of the spherical hinge and take the spherical hinge from a rotary fist.
6. Establish a pin of the new spherical hinge in a rotary fist and fix a nut, having tightened it the demanded moment. Fix a nut from unscrewing new the shplinty.
7. Establish the spherical hinge on the bottom lever of a forward suspension bracket and fix bolts.
8. Establish a wheel and lower the car.