Toyota Camry

1992-1997 of release

Repair and car operation

Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
- 5. Cooling and heating
   5.2. General information
   5.3. Antifreeze
   5.4. Hoses of system of cooling
   + 5.5. Check and thermostat replacement
   + 5.6. Check and replacement of the fan of a radiator and relay
   + 5.7. The radiator fan (the V6 models from 1992 to 1994)
   + 5.8. Radiator
   5.9. Broad tank
   + 5.10. Water pump
   + 5.11. The sensor of temperature of cooling liquid
   5.12. Heater fan
   5.13. Resistor of the fan of a heater
   5.14. Heater radiator
   + 5.15. Control panel heater
   5.16. Air central air
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment

5.2. General information

GENERAL INFORMATION

Elements of system of cooling of the engine


1–a branch pipe of intake of cooling liquid; 2–thermostat; 3–water pump;	4–IAC valve; 5–an exit of cooling liquid from the engine; 6–oil radiator

Arrangement of a branch pipe of giving in the engine of cooling liquid on the V6 engine 1MZ-FE

Preventions

When opening a cover of a broad tank on the hot engine it is necessary to be careful, as leaving hot pairs can lead to strong burns.

Do not allow hit of cooling liquid on clothes and a paint and varnish covering of a body. Otherwise wash out a surface a plentiful quantity of water.

After switching off of the hot engine the radiator fan can turn on.

The system of cooling of tight type turns on the pump, a radiator, a broad tank, the electric fan of a radiator and the thermostat. At start of the cold engine cooling liquid circulates round the block of cylinders, a head of the block and a final collector. Warm cooling liquid passes through a radiator of a heater and comes back to the water pump. As cooling liquid when heating extends, its level in a broad tank raises. Intake of cooling liquid through a radiator is closed that provides the closed thermostat. When cooling liquid reaches the predetermined temperature, the thermostat opens and hot cooling liquid passes through a hose to a radiator. As cooling liquid passes through a radiator, there is its cooling by a stream of counter air. The electric fan of cooling of the radiator, established behind a radiator, copes the thermal sensor located in a radiator. Dopolnitel but to the ordinary sensor of the index of temperature of cooling liquid temperature switches and sensors for ensuring work of system of injection of fuel and ignition system are established.