Toyota Camry

1992-1997 of release

Repair and car operation


Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
- 15. Electric equipment
   15.2. General information
   15.3. Electric chains
   + 15.4. Detection of not closed chain
   15.5. Safety locks
   15.6. Relay
   + 15.7. Multipurpose switches of a steering column
   + 15.8. Ignition lock
   15.9. Switch of a heater of back glass
   15.10. Check of a heater of back glass
   15.11. Radio receiver
   15.12. Loudspeakers
   15.13. Aerial
   15.14. Replacement of bulbs of headlights
   15.15. Adjustment of light of headlights
   15.16. Headlight
   - 15.17. Replacement of bulbs of an incandescence
      15.17.2. Back lamp
      + 15.17.3. Top stoplight
      15.17.4. Illumination of a combination of devices
      15.17.5. Illumination of registration plate
      15.17.6. Salon illumination
   + 15.18. Screen wiper engine
   15.19. Combination of devices
   15.20. Sound signal
   15.21. System cruise control
   15.22. Window regulators with an electric drive
   15.23. System of the central blocking of locks
   15.24. Rear-view mirrors with the electric drive
   15.25. Safety airbag
   + 15.26. Electric equipment schemes



15.17.2. Back lamp
GENERAL INFORMATION

Elements of fastening of a back lamp on cars with a body "sedan"

 

Fastening of a back lamp on cars with a body "versatile person"

 

PERFORMANCE ORDER
1. On models with a body "sedan" unscrew screws and remove a back lamp (see fig. Elements of fastening of a back lamp on cars with a body "sedan"). Turn the holder of a bulb counter-clockwise and remove it from a back lamp. Press and in this situation turn a bulb counter-clockwise and take it from the holder of a bulb.
2. On models with a body "versatile person" unscrew screws and remove a back lamp (see fig. Fastening of a back lamp on cars with a body "versatile person"). Press and in this situation turn clockwise a bulb and take it from the holder.
3. Installation is made in sequence, return to removal.