Toyota Camry

1992-1997 of release

Repair and car operation

Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
- 15. Electric equipment
   15.2. General information
   15.3. Electric chains
   - 15.4. Detection of not closed chain
      15.4.2. Detection of a rupture of a chain
      15.4.3. Detection of a source of short circuit
      15.4.4. Detection of bad grounding
   15.5. Safety locks
   15.6. Relay
   + 15.7. Multipurpose switches of a steering column
   + 15.8. Ignition lock
   15.9. Switch of a heater of back glass
   15.10. Check of a heater of back glass
   15.11. Radio receiver
   15.12. Loudspeakers
   15.13. Aerial
   15.14. Replacement of bulbs of headlights
   15.15. Adjustment of light of headlights
   15.16. Headlight
   + 15.17. Replacement of bulbs of an incandescence
   + 15.18. Screen wiper engine
   15.19. Combination of devices
   15.20. Sound signal
   15.21. System cruise control
   15.22. Window regulators with an electric drive
   15.23. System of the central blocking of locks
   15.24. Rear-view mirrors with the electric drive
   15.25. Safety airbag
   + 15.26. Electric equipment schemes

15.4.3. Detection of a source of short circuit


For detection of a source of short circuit, in the beginning disconnect elements of loading of a chain (elements of loading of a chain are elements which consume an electric current, such as bulbs, electric motors, heating elements etc.).

Remove the corresponding safety lock and connect щупы a tester or the voltmeter to safety lock plugs.

Include a food in chains, thus do not forget that some chains of electric equipment join only at key turn in the ignition lock in a certain situation.

If tension is present (about what the control bulb testifies or voltmeter indications), it means that in a chain there is a short circuit.

If at carrying out check of tension is not present, however the safety lock still fuses at connection of that loading of a chain, it testifies to failure of an element of loading.