Toyota Camry

1992-1997 of release

Repair and car operation


Kamri's Toyota
+ General data
- 1. Maintenance
   1.2. Periodicity of service
   - 1.3. Maintenance
      + 1.3.1. Each 400 km or weekly
      + 1.3.2. Each 5 000 km or 3 months
      + 1.3.3. Each 10 000 km or 6 months
      + 1.3.4. Each 25 000 km or 12 months
      - 1.3.5. Each 50 000 km or 24 months
         - 1.3.5.2. Replacement of cooling liquid
            1.3.5.2.1. Plums of cooling liquid
            1.3.5.2.2. Washing of system of cooling
            1.3.5.2.3. Filling of system of cooling
         1.3.5.3. Check of system of catching паров fuels
         1.3.5.4. Check of an exhaust system
         + 1.3.5.5. Oil replacement in an automatic transmission and the main transfer
         1.3.5.6. Oil replacement in a makhanichesky transmission
         1.3.5.7. Check of fastening of a suspension bracket
         + 1.3.5.8. Check and replacement of spark plugs
         1.3.5.9. Check and replacement of high-voltage wires and distributor details
      + 1.3.6. Each 100 000 km or 48 months
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment



1.3.5.2.1. Plums of cooling liquid
GENERAL INFORMATION

Arrangement of jams plum of cooling liquid on the engine 3MZ-FEV6
1–a stopper plum of cooling liquid from a radiator;

2–a stopper plum of cooling liquid from the block of cylinders of the engine

PERFORMANCE ORDER
1. Lift a forward part of the car and fix on supports.
2. Remove a radiator stopper.
3. Establish the big container under an inlet branch pipe of a radiator. Dress a hose in internal diameter of 10 mm on the drainage valve to direct cooling liquid to the container, then open the drainage valve. 4. When the stream of the cooling liquid leaving a radiator will stop, establish the container under a drain stopper of the block of cylinders. Unscrew a drain stopper and give the chance to flow down cooling liquid from the block of cylinders.