Toyota Camry

1992-1997 of release

Repair and car operation

Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
- 3. Six-cylinder V6 engines
   3.2. General information
   3.3. The repair which is not demanding removal of the engine
   + 3.4. Top dead point (VMT) of the piston of the first cylinder
   + 3.5. Cover of a head of the block of cylinders
   + 3.6. Inlet collector
   3.7. Final collector
   + 3.8. Gear belt and pulleys
   3.9. Replacement of a forward sealing ring of a cranked shaft
   3.10. Replacement of sealing rings of camshafts
   + 3.11. Camshafts and pushers
   + 3.12. Head of the block of cylinders
   + 3.13. Oil pallet
   + 3.14. Oil pump
   3.15. Drive flywheel / plate
   3.16. Replacement of a back sealing ring of a cranked shaft
   3.17. Suspension bracket of the power unit
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment

3.3. The repair which is not demanding removal of the engine

GENERAL INFORMATION

Many repair work on the engine can be carried out directly on the car. Prior to the beginning of repair work we recommend to clear the engine and a motor compartment carefully. Depending on a type of carried-out works, probably, it is necessary to remove a cowl.

Without removing the engine from the car it is possible to eliminate different types of leaks, for example, to replace laying of inlet and final collectors, laying of a cover of a head, laying of the oil pallet, sealing rings of a cranked shaft and laying of a head of the block of cylinders.

External details and units, such as inlet and final collectors, the oil pallet, the oil pump, a water pomp, a starter, the generator, the distributor of ignition and components of fuel system, also can be removed from the engine for repair.

As the head of the block of cylinders can be removed without dismantle of all engine from the car, replacement of camshafts, a gear belt and pulleys of a gear belt it is possible to make on the engine established in the car.