Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
- 3. Six-cylinder V6 engines
   3.2. General information
   3.3. The repair which is not demanding removal of the engine
   + 3.4. Top dead point (VMT) of the piston of the first cylinder
   + 3.5. Cover of a head of the block of cylinders
   + 3.6. Inlet collector
   3.7. Final collector
   + 3.8. Gear belt and pulleys
   3.9. Replacement of a forward sealing ring of a cranked shaft
   3.10. Replacement of sealing rings of camshafts
   + 3.11. Camshafts and pushers
   + 3.12. Head of the block of cylinders
   + 3.13. Oil pallet
   + 3.14. Oil pump
   3.15. Drive flywheel / plate
   3.16. Replacement of a back sealing ring of a cranked shaft
   3.17. Suspension bracket of the power unit
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment



3.9. Replacement of a forward sealing ring of a cranked shaft

Installation of a forward sealing ring of a cranked shaft

PERFORMANCE ORDER

1. Remove a gear belt and a pulley of a cranked shaft.

2. Cut through in an end face of a sealing ring an opening.

3. Using the edge of a thin screw-driver wound by a sticky tape, take a sealing ring from a nest.
4. Clear a nest of a sealing ring and grease a new sealing ring with pure engine oil.
5. Using a tubular opravka of the corresponding diameter, establish a sealing ring into place.
6. Establish a pulley of a cranked shaft and a gear belt.