Toyota Camry

1992-1997 of release

Repair and car operation


Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
- 5. Cooling and heating
   5.2. General information
   5.3. Antifreeze
   5.4. Hoses of system of cooling
   + 5.5. Check and thermostat replacement
   + 5.6. Check and replacement of the fan of a radiator and relay
   + 5.7. The radiator fan (the V6 models from 1992 to 1994)
   + 5.8. Radiator
   5.9. Broad tank
   + 5.10. Water pump
   - 5.11. The sensor of temperature of cooling liquid
      5.11.2. Replacement
   5.12. Heater fan
   5.13. Resistor of the fan of a heater
   5.14. Heater radiator
   + 5.15. Control panel heater
   5.16. Air central air
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment



5.11.2. Replacement
GENERAL INFORMATION

For access to the temperature sensor on the V6 engine 3VZ-FE unscrew two bolts of fastening of the thermofilter and remove it.

PERFORMANCE ORDER
1. Merge cooling liquid from system of cooling of the engine.
2. Disconnect the electric socket from the temperature sensor.
3. Unscrew the sensor of temperature of cooling liquid.
4. Screw in the new sensor and tighten it the demanded moment.
Connect to the sensor the electric socket and fill in cooling liquid in the engine.