Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
- 6. Fuel system
6.2. General information
6.3. Pressure removal in fuel system
+ 6.4. Check of the fuel pump
6.5. Fuel pump
+ 6.6. Fuel level sensor
6.7. Fuel tank
6.8. Air filter
+ 6.9. Accelerator cable
6.10. Electronic system of injection of EFL fuel
+ 6.11. Fuel system
6.12. Check of system of injection of fuel
+ 6.13. Check and replacement of elements of system of injection of EFI fuel
6.14. Fuel highway and fuel nozzles
+ 6.15. Valve of a mode of idling of central air of air
6.16. Air inlet chamber (only V6 engines)
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment
|
Prevention
The fuel system is under pressure a long time after engine switching off. At any separation топливопроводов it is necessary to remove previously pressure in fuel system.
The power supply system consists of the fuel tank established under a back part of the car, the electric fuel pump shipped in a tank, the fuel filter, the fuel highway and returnable fuel hoses. The fuel pump submits fuel to the fuel highway which also carries out tank functions for fuel nozzles. The fuel filter established between the fuel highway and the fuel pump, makes purification of fuel. |
|