Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
- 6. Fuel system
   6.2. General information
   6.3. Pressure removal in fuel system
   + 6.4. Check of the fuel pump
   6.5. Fuel pump
   - 6.6. Fuel level sensor
      6.6.2. Replacement
   6.7. Fuel tank
   6.8. Air filter
   + 6.9. Accelerator cable
   6.10. Electronic system of injection of EFL fuel
   + 6.11. Fuel system
   6.12. Check of system of injection of fuel
   + 6.13. Check and replacement of elements of system of injection of EFI fuel
   6.14. Fuel highway and fuel nozzles
   + 6.15. Valve of a mode of idling of central air of air
   6.16. Air inlet chamber (only V6 engines)
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment
фотосъемка новорожденных
вакансии - Москва



6.6. Fuel level sensor

6.6.1. Check

PERFORMANCE ORDER
1. Fill in a full tank of fuel.
2. Remove back sitting and a protective cover of a fuel tank.
3. Disconnect the electric socket from a fuel tank.
4. Using an ohmmeter, check resistance between contact ми 1 and 2 electric sockets.
At a full tank resistance between contacts 1 and 2 should make 2–3 Ohms.
5. Connect into place the electric socket and spend fuel almost to an empty tank.
6. Measure resistance between contacts 1 and 2 electric sockets which should make 110–115 Ohm on an empty fuel tank.
7. If resistance of the fuel level sensor does not correspond to demanded values, replace the sensor. It is possible to measure resistance of the sensor also, having removed the sensor from a fuel tank and moving it a hand.