Toyota Camry

1992-1997 of release

Repair and car operation

Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
- 6. Fuel system
   6.2. General information
   6.3. Pressure removal in fuel system
   - 6.4. Check of the fuel pump
      6.4.2. Check of the pressure created by the fuel pump
      6.4.3. Check of a regulator of pressure of fuel
      + 6.4.4. Check of the relay of the fuel pump
   6.5. Fuel pump
   + 6.6. Fuel level sensor
   6.7. Fuel tank
   6.8. Air filter
   + 6.9. Accelerator cable
   6.10. Electronic system of injection of EFL fuel
   + 6.11. Fuel system
   6.12. Check of system of injection of fuel
   + 6.13. Check and replacement of elements of system of injection of EFI fuel
   6.14. Fuel highway and fuel nozzles
   + 6.15. Valve of a mode of idling of central air of air
   6.16. Air inlet chamber (only V6 engines)
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment

6.4. Check of the fuel pump

6.4.1. Check of operability of the fuel pump

1. Include ignition, but do not start the engine.
2. Connect +B and Fp contacts by an additional wire on the control socket (see fig. Electric circuit of a food of the fuel pump). On models with the V6 engine 1MZ-FE since 1994 working capacity check toplivno го the pump make, submitting on the fuel pump additional wires tension of the accumulator, and by noise of the working electric motor determine operability of the fuel pump.
3. Remove an additional closing wire and close a cover of the control socket.
4. If at check the fuel pump did not work, check the following electric components: the fuse on 15А the EFI block; AM2 safety lock on 30А; main EFI relay; fuel pump; power-supply circuits of the electric pump and sockets (see fig. Electric circuit of a food of the fuel pump).