Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
- 13. Suspension bracket
   13.2. General information
   + 13.3. Forward stabilizer of cross-section stability
   + 13.4. The lobby is resistant
   13.5. Repair of a forward rack
   + 13.6. Bottom lever of a forward suspension bracket
   13.7. Replacement of the bottom hinge of a forward suspension bracket
   + 13.8. Rotary fist
   13.9. Back stabilizer of cross-section stability
   + 13.10. Rack of a back suspension bracket
   13.11. Longitudinal draft of a back suspension bracket
   + 13.12. Levers of a back suspension bracket
   + 13.13. Nave of a back suspension bracket
   + 13.14. Fixing element of a back nave
   + 13.15. Steering wheel
   + 13.16. Tips of steering draft
   13.17. Replacement of protective covers of steering transfer
   + 13.18. Steering transfer
   + 13.19. Pump of the amplifier of a steering
   13.20. Air removal from steering system with the amplifier
   - 13.21. Wheels and tires
      13.21.2. Replacement of wheels
      13.21.3. Running in of tires
      13.21.4. Storage of tires
      13.21.5. Balancing of wheels
      13.21.6. Antisliding chains
      13.21.7. Pressure check in tires
      13.21.8. Check of a profile of tires
   13.22. Corners of installation of wheels
+ 14. Body
+ 15. Electric equipment



13.21.3. Running in of tires

GENERAL INFORMATION

New tires have a smooth external surface and consequently it is necessary to make a running in of tires. Initial wear at a running in does the tire of rougher.

On the first 200 km of run of the car it is necessary to move, especially on a wet covering, very carefully.