|
1. On models with a mechanical transmission check a flywheel on wear from coupling and a condition of teeths of the gear screw. |
|
2. On models with an automatic transmission check a condition of a drive of the hydrotransformer and a gear wreath. |
| 3. Clear interfaced surfaces of a flywheel and a cranked shaft. Establish a flywheel according to earlier put labels and screw up fastening bolts. |
| 4. Fix a flywheel from a provorachivaniye and finally tighten bolts of fastening of a flywheel. |
| 5. Further installation is made in sequence, return to removal. |