Toyota Camry

1992-1997 of release

Repair and car operation


Kamri's Toyota
+ General data
+ 1. Maintenance
- 2. Engine
   2.2. Operations on engine repair on the car
   2.3. Top dead point of the first cylinder
   + 2.4. Cover of a head of the block of cylinders
   + 2.5. Inlet collector
   + 2.6. Final collector
   + 2.7. Gear belt and pulleys
   2.8. Replacement of a forward sealing ring of a cranked shaft
   2.9. Replacement of a sealing ring of a camshaft
   + 2.10. Camshaft and pushers
   + 2.11. Head of the block of cylinders
   + 2.12. Oil pallet
   - 2.13. Oil pump
      2.13.2. Check
      2.13.3. Installation
   + 2.14. Drive flywheel / plate
   2.15. Replacement of a back sealing ring of a cranked shaft
   + 2.16. Suspension bracket of the power unit
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment



2.13. Oil pump

2.13.1. Removal
GENERAL INFORMATION

Details of the oil pump
 1–pulley;
2–cover of the oil pump;
3–internal rotor;
4–sealing laying of round section;
5–external rotor;
6–case of the oil pump;
7–laying;
8–piston of a safety valve;
9–spring;
10-clamp;
11-persistent ring

PERFORMANCE ORDER
1. Remove the oil pallet.
2. Unscrew nuts and remove a pipe of a maslopriyemnik.
3. Support the engine a jack and remove the bottom single pulley, a pulley of an auxiliary belt of a cranked shaft, a gear belt and a pulley of a cranked shaft.
4. Unscrew 12 bolts and remove the oil pump from the engine. 5. Unscrew two remained bolts and uncover the oil pump.
6. Fix in a vice with soft sponges a pulley of the oil pump and unscrew a nut of fastening of a pulley. Take an internal rotor of the oil pump.
7. Clear interfaced surfaces of the oil pump and the block of cylinders of traces of old laying.
8. Remove a lock ring of a safety valve and take a clamp, a spring and the piston.