Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
+ 1. Maintenance
- 2. Engine
   2.2. Operations on engine repair on the car
   2.3. Top dead point of the first cylinder
   - 2.4. Cover of a head of the block of cylinders
      2.4.1. Removal
      2.4.2. Installation
   + 2.5. Inlet collector
   + 2.6. Final collector
   + 2.7. Gear belt and pulleys
   2.8. Replacement of a forward sealing ring of a cranked shaft
   2.9. Replacement of a sealing ring of a camshaft
   + 2.10. Camshaft and pushers
   + 2.11. Head of the block of cylinders
   + 2.12. Oil pallet
   + 2.13. Oil pump
   + 2.14. Drive flywheel / plate
   2.15. Replacement of a back sealing ring of a cranked shaft
   + 2.16. Suspension bracket of the power unit
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment



2.4.2. Installation

PERFORMANCE ORDER
1. Clear interfaced surfaces of a cover and a head of the block of cylinders.
2. Put on a head of the block of cylinders a thin layer of hermetic in the places shown in drawing.
3. Establish on a head of the block of cylinders new laying, and then a cover of a head of the block of cylinders.
4. Screw nuts of fastening of a cover of a head of the block of cylinders and tighten them in some stages them the demanded moment.
5. Further installation is made in sequence, return to removal.